Defoamers for Lubricants & Metalworking Fluids

Product Details:

We have emerged as a prominent manufacturer and supplier of quality-approved TINYFOAM AC 100. Our offered chemicals are widely used in several industries and sectors as a lubricant for different machines and tools. Moreover, these chemicals are delivered at customers’ premises within the promised time frame with the help of our distribution network.

Features:

• Non-sticky
• Longer shelf life
• Accurate composition

Product Details:

We are a well-known organization that is engaged in providing customers with TINYFOAM EM PSD. All the offered chemicals are widely used as a lubricant for high performing machines and equipment. In addition to this, these chemicals are stringently tested by expert quality controllers on various parameters to ensure zero impurity.

Features:

• Precise pH value
• Environment-friendly
• Non-toxic

TINYFOAM EM PSD is a silicone antifoam emulsion especially designed for aqueous Metalworking Fluids in emulsion form. It renders metalworking fluids non-foaming. Combination of Polydimethylsiloxane with knock-down boosters.

Applications and typical treat level recommended:

• Apply the product in its natural state by aspersion or by dosing pump and adjust the initial dosage according to the requirements.
• TINYFOAM EM PSD may also be diluted with water before dosing with a special metering system for automatic dosing, which means product will be automatically added only when needed.

Benefits:

• TINYFOAM EM PSD is a 14% active product yet shows excellent performance in the control of foams.
• TINYFOAM EM PSD leaves no residues in the pipes or valves of the equipment used. It is biodegradable and non-toxic to aquatic life at the recommended pre-dilution and dosage levels.
• TINYFOAM EM PSD also performs exceedingly well in controlling foams in waste-water treatment process and can be used in a highly diluted ratio with water, thus being highly cost-effective.

Product Details:

TINYFOAM EMS 30 is a silicone based defoamer catering to a wide spectrum of applications such as metal working, industrial cleaning, waste water treatment etc.

We are highly appreciated in the market for our exquisite collection of TINYFOAM EMS 30. Formulated under the supervision of expert professionals, these chemicals are meeting with international quality standards. Furthermore, our packaging experts make use of quality material to pack these chemicals for retaining their properties.

Features:

• Accurately composed
• Longer shelf life
• Zero impurity

TINYFOAM EMS 30 is a silicone-based defoamer catering to multiple applications across wide spectrum of applications such as industrial cleaning, waste water treatment , Metal working chemicals etc. A Blend of polydimethyl siloxane, silica, polyether silicones and surfactants.

Applications and typical treat level recommended:

• Exact dosage can only be arrived at by conduction a plant scale trial.
• It is recommended to use TINYFOAM EMS 30 in its natural state or in pre-diluted state of upto 5% solution in water. Concentration can be adjusted according to the stubbornness of foams.
• TINYFOAM EMS 30 may also be distributed with a water dilution system and / or  with  a special   metering   system   for   automatic   dosing,   which   means   product   will   be automatically added only when needed.

Benefits:

• TINYFOAM EMS 30 performs tremendously in controlling foam generation in general chemical  processing  applications  such  as  industrial  cleaning,  waste  water  treatment, Metal working chemicals etc.
• It is very effective even at low concentrations and facilitates smoother pump operation, transport.
• TINYFOAM EMS 30 leaves no residues in the pipes or valves of the equipment used.

Product Details:

TINYFOAM EM 0508 is a special self-emulsifying antifoam formulation for Coatings, Textile Auxillaries, Cooling Lubricants and Dispersions for stripping processes.

 

TINYFOAM EM 0508 is a special self-emulsifying antifoam formulation for Coatings, Textile Auxillaries, Cooling Lubricants and Dispersions for stripping processes. Combination of Modified Organic Silicones and fillers.

Applications and typical treat level recommended:

• Apply the product in its natural state by aspersion or by dosing pump and adjust the initial dosage according to the requirements.
• TINYFOAM EM 0508 may also be distributed with a water dilution system and or with a special metering system for automatic dosing into the system. However, low concentrated dilutions should be used immediately.

Benefits:

• TINYFOAM EM 0508 is a 100% active product and shows excellent performance in the control of foams and maintains flowability of the end product at desired levels (in applications such as paints and coatings).
• It is very effective even at low concentrations and facilitates smoother pump operation, transport.
• TINYFOAM EM 0508 leaves no residues in the pipes or valves of the equipment used.

Product Details:

Our company specializes in manufacturing and supplying high quality TINYFOAM EM 0508, high efficient defoamer for metal working and lubricants industry. Precisely formulated, all our offered chemicals are available in different size of packaging at most competitive prices. Apart from this, our C&F agents enable us to deliver all the chemicals at clients’ destination within the stipulated time frame.

Features:

• Precise pH value
• Zero impurity
• Safe to use

Product Details:

TINYFOAM EM PSD is a silicone antifoam emulsion especially designed for aqueous Metalworking Fluids in emulsion form. It renders metalworking fluids non-foaming. Combination of Polydimethylsiloxane with knock-down boosters.

Features:

• Water soluble
• Longer shelf life
• Accurate composition

Product Details:

TINYFOAM EM SD20 is a special self-emulsifying antifoam formulation for Coatings, Textile Auxillaries, Cooling Lubricants and Dispersions for stripping processes. It is a combination of polymethyl/dimethyl siloxane and Trimethylbenzene & Proprietary polyethers.

Apply the product in its natural state by aspersion or by dosing pump and adjust the initial dosage according to the requirements. D’FOAM EM SD20 may also be distributed with a water dilution system and or with a special metering system for automatic dosing into the system. However, low concentrated dilutions should be used immediately.

Benefits:

• TINYFOAM EM SD20 is a 100% active product and shows excellent performance in the control of foams and maintains flowability of the end product at desired levels (in applications such as paints and coatings).
• It is very effective even at low concentrations and facilitates smoother pump operation, transport.
• TINYFOAM EM SD20 leaves no residues in the pipes or valves of the equipment used.