Tiny Chempro
Tiny Chempro
Andheri West, Thane, Maharashtra
Send SMS
Send E-mail

Defoamers for Textile

We have Silicone and Non Silicone Defoamers for various stages in Textile processing. We also have full range of Textile Auxillaries.
Request CallBack

D Foam AP 9w

Typical chemical and physical D’FOAM AP 9W is an oil-soluble defoamer for coating systems such as in paper.

Properties : Paints, latex based coatings such as Acrylic, Butadene, Styrene and PVA emulsions. A Blend of Mineral Oil with fatty acid esters

 

Properties:

  • Appearance Amber to Pale yellow liquid
  • Active content 99.9 %
  • Solubility - Soluble in Oil
  • Dispersible in water
  • Easily dispersible in latex paint and adhesive system.
  • Specific gravity 0.86 + 0.02

 

Applications and typical treat level recommended D’FOAM AP 9WPaints, Latex coating 250 - 300gms / 100 Litres may also be distributed with an oil dilution system and or with a special metering system for automatic dosing in any system, which means product will automatically added only when needed.

 

Benefits

  • D’FOAM AP 9W is a 99.9% active product and performs tremendously in controlling foam generation in coating systems based on PVA Acrylic, Ethylene Vinyl Acetate and water soluble alkyds.
  • It extends excellent brush ability and does not cause fish eyes, thereby not affecting the finished product.

 


Ask For Price
Yes! I am interested
Request CallBack

D Foam BILS 30

Typical chemical and physical D’FOAM BILS 30 is a silicone-based defoamer catering to multiple Properties applications across wide spectrum of applications such as industrial cleaning, waste water treatment etc. A Blend of polydimethyl siloxane, silica, polyether silicone and surfactants.

 

Properties:

Appearance Milky liquid Solid
Active content 30 + 2
Diluent Water
pH 7.5+1.0
Specific Gravity apporx.1.00
Ionicity Non Ionic

 

Applications and typical treat level recommended Dosage 50ppm to 100ppm Exact dosage can only be arrived at by conduction a plant scale trial. It is recommended to use D’FOAM BILS 30 in its natural state or in pre-diluted state of upto 5% solution in water. Concentration can be adjusted according to the stubbornness of foams. D’FOAM BILS 30 may also be distributed with a water dilution system and / or with a special metering system for automatic dosing, which means product will be automatically added only when needed.

 

Benefits

  • D’FOAM BILS 30 performs tremendously in controlling foam generation in general chemical processing applications such as industrial cleaning, waste water treatment etc.
  • It is very effective even at low concentrations and facilitates smoother pump operation, transport. D’FOAM BILS 30 leaves no residues in the pipes or valves of the equipment used.

Ask For Price
Yes! I am interested
Request CallBack
D Foam EM PSD
Ask For Price

D Foam EM PSD

Our company specializes in manufacturing and supplying high quality D Foam EM PSD. Precisely formulated, all our offered chemicals are available in different size of packaging at most competitive prices. Apart from this, our C&F agents enable us to deliver all the chemicals at clients’ destination within the stipulated time frame.

Features:

  • Precise pH value
  • Zero impurity
  • Safe to use

Yes! I am interested
View PDF
Request CallBack
D Foam RIL 0158
Ask For Price

D Foam RIL 0158

With the help of our experienced professionals, we are able to offer D Foam RIL 0158. The offered chemicals are widely used for industrial cleaning, waste water treatment, gas sweetening & drying and water borne coating. Precisely formulated, these chemicals are thoroughly checked by expert quality controllers on various parameters to ensure zero impurity.

Features:

  • Milky white emulsion
  • Non-toxic
  • Longer shelf life

Properties:

 

AppearanceMilky White Emulsion
Active content10+1
DiluentWater
pH7.5+1.0
Specific Gravityapporx.1.00
IonicityNon Ionic
Dosage50ppm to 100ppm

 


Application & typical recommended

It is recommended to use D’FOAM RIL 0158 in its natural state or in pre-diluted state of upto 5% solution in water. Concentration can be adjusted according to the stubbornness of foams.

D’FOAM RIL 0158 may also be distributed with a water dilution system and / or with a special metering system for automatic dosing, which means product will be automatically added only when needed

 

Benefits

  • D’FOAMRIL0158performs tremendously in controlling foam generation in general chemical processing applications such as industrial cleaning, waste water treatment, Gas drying & Gas Sweetening & in clear, water borne wood coatings. Suitable for use in high gloss, semi – gloss paints
  • It is very effective even at low concentrations and facilitates smoother pump operation, transport.
  • D’FOAM RIL 0158 leaves no residues in the pipes or valves of the equipment used.

 

 

 

 


Yes! I am interested
View PDF
Request CallBack
D Foam RIL 0385
Ask For Price

D Foam RIL 0385

Our domain expertise has enabled us to come up with an excellent quality D Foam RIL 0385. This chemical is a milky free-flowing emulsion which is used in a number of industrial applications. Priced reasonably, the offered chemical is provided to clients in different size of packs at market leading prices.

Features:

  • Quality-tested
  • Precisely composed
  • Eco-friendly

 

Other:

  • Appearance Milky free-flowing emulsion
  • pH 6.5 to 7.5
  • Solid content 30%
  • Specific gravity at 25 ºC approx. 1.00 g/cm3

 

Applications and typical treat level recommended D’FOAM RIL 0358 may be pre-diluted by adding water into it in a pre-mixing vessel. Apply the product in its natural state by aspersion or by dosing pump and adjust the initial dosage according to the requirements.


Benefits:

  • D FOAM RIL 0358 is a highly ,active product and shows excellent performance in the control of foams by significantly reducing the entrained air content.
  • It is very effective even at low concentrations and facilitates smoother pump operation, transport.
  • TICOL 8530 leaves no residues in the pipes or valves of the equipment used.

 


Yes! I am interested
Request CallBack
D Foam RIL N 50
Ask For Price

D Foam RIL N 50

Typical chemical and physical D’FOAM RIL N50 is a versatile anti foam for Textile processes such as Jet Dyeing, Properties  scouring etc. besides going into coatings related applications. It outperforms silicone-based anti foams due to its efficacy in both – acidic and alkaline media. A Proprietary Blend of Mineral Oils, Synthetic Waxes, Fatty Acids and Fatty Acid Esters


Properties:

 

AppearanceHazy yellow liquid
Active content50.00%
Density0.93g/cm3 at 25 ºC
pH7 + 0.5

 

Applications and 0.2% to 0.5% of weight of foaming media typical treat level recommended  Apply the product in its natural state as it is not dilution-stable.

 

Benefits:

  • D’FOAMRILN 50is a 50% active product and shows excellent performance in the control of foams and maintains flowability of the end product at desired levels (in applications such as textiles & coatings).
  • D’FOAM RIL N 50 outperforms its silicone-based peers due to its ability to withstand extreme pH conditions hence we call it a UNIVERSAL DEFOAMER.
  • It is very effective even at low dosage levels.
  • It can be also be used in waste-water treatment as it is completely biodegradable.

Yes! I am interested
Request CallBack
D Foam RIL NS
Ask For Price

D Foam RIL NS

Typical chemical and physical  d’foam ril ns  is a versatile antifoam for textile processes such as jet dyeing, Properties scouring  etc. Besides going into coatings related applications. It outperforms silicone-based antifoams due to its efficacy in both – acidic and alkaline media. A proprietary blend of mineral oils, synthetic waxes, fatty acids and fatty Acid Esters

 

Properties:

  • Appearance hazy yellow liquid
  • Active content 100 %
  • Density 0. 93g/cm3 at 25 ºc
  • pH 7 + 0. 5

 

Applications and 0. 2% to 0. 5% of weight of foaming media typical treat level Recommended apply the product in its natural state as it is not dilution-stable. This product exhibits separation tendency on standing. please stir well before use.


Benefits

  •  D’foam rilns is a 100% active product and shows excellent performance in the control of foams and maintains flowability of the end product at desired levels (in applications such as textiles & coatings).
  • D’foam ril ns outperforms its silicone-based peers due to its ability to withstand extreme ph conditions hence we call it a universal defoamer.
  • It is very effective even at low dosage levels.
  • It can be also be used in waste-water treatment as it is completely biodegradable.

Yes! I am interested
X
Looking for “Defoamers for Textile”?